BMW RR1000 9S12G128

Posted In: Bikes
  • Participant
    Participant
    on: 15/10/2018 at 12:06 pm #22033

    Hi

    I have a RR1000 BMW that I need to make a spare key, Using module 191 I have cut 1 track and soldered 4 wires then tried FORD ID6380bit transpoder but it does not start bike after programming.

    The Original key still start bike 100% but spare key does not start.

    I tried FORD ID63-80bit and ID60-80bit both fail.

    Participant
    Participant
    on: 30/10/2018 at 2:45 pm #22089

    Hello you have to weld the cuted line after program the key i do lot of this bikes this software work 100% or check your chip quality.

    Participant
    Participant
    on: 25/07/2019 at 5:36 pm #23007

    hi,
    boss can u send the diagram fro bmw r1200gs k50 2016 model pls

    Participant
    Participant
    on: 26/03/2020 at 11:13 pm #23718

    Is there anyone programming a key for the BMW GS 1200 2017?

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.