Software modules description and prices

Software module 1 – Fiat, Lancia, Citroen, Peugeot immobox Delphi Price:100 Euro
Memory device is serial memory 93c46 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Fiat: Barchetta, Brava, Bravo(-1998), Cinquecento, Ducato(-2001), Marengo, Panda(-2002), Punto(-1999), Seicento(-1999), Tempra
Lancia: Dedra, Delta
Citroen: Jumper(-2001), Relay(-2001)
Peugeot: Boxer(-2001)

Software module 2 – Fiat, Lancia, Maserati IMM001.01 immobox Marelli Price:100 Euro
Memory device is Motorola MCU MC68HC05E6 SO28 package.
Expected file size is 160 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Fiat: Bravo(1998-2001), Marea(1998-), Palio(-1999)
Lancia:Dedra, Y
Maserati: GT

Software module 3 – Fiat, Lancia IMM110.01 immobox Marelli Price:100 Euro
Memory device is Motorola MCU MC68HC908AZ32 QFP64 package.
Expected file size is 512 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Fiat: Bravo(1998-2001), Marea(1998-), Palio(-1999)
Lancia: Dedra, Y
Maserati: GT

Software module 4 – Alfa Romeo, Iveco CODE1 immobox Bosch Price:100 Euro
Memory device is serial eeprom 93c46, which can be either DIL8 or SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Fiat: Coupe, Croma
Alfa Romeo: 145, 146, 155, 164, GTV, Spider
Iveco: Daily(-2001)
Lancia: K, K coupe

Software module 5 – Alfa Romeo CODE2 immobox Bosch Price:100 Euro
Memory device is serial eeprom 93c56 SMD8 package.
Expected file size is 256 bytes.
Use PCF7935 or Silca T15 – JMA TP14 transponder.
Written transponder is ready programmed to start the vehicle.
If old keys are erased, software shows PIN code and prepares transponder, ready to be matched with vehicle using diagnostic device.
Vehicles equipped with this unit:
Alfa Romeo: 156(1998-2001), 166(1998-2001)

Software module 6 – Fiat, Lancia, Alfa Romeo, Maserati CODE2 with BSI Marelli Price:100 Euro
Memory device is Motorola MCU, which can be either MC68HC912DG128 or MC9S12DG256, both QFP 112 package.
You can read and write Motorola with TMPro, view connection diagram.
For MC68HC912DG128 expected file size is 2048 bytes, for MC9S12DG256 file size must be 4096 bytes.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Software shows 5-digit PIN code.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Alfa Romeo: 147, GT
Fiat: Stilo(1999-2007), Palio(1999-), Idea
Lancia: Thesis, Ypsilon
Maserati: Quattroporte, Granturismo
Ferrari: 458

Software module 7 – Fiat CODE2 with BSI Delphi Price:100 Euro
Memory device is serial eeprom 93c66 SMD8 package.
Expected file size is 512 bytes.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Software shows 5-digit PIN code.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Fiat: Albea, Doblo, Punto(1999-), Siena, Strada

Software module 8 – Fiat, Citroen, Peugeot CODE2 immobox Delphi Price:100 Euro
Memory device is serial eeprom 93c56 SMD8 package.
Expected file size is 256 bytes.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Software shows 5-digit PIN code.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Fiat: Ducato(2001-2006), Seicento(1999-)
Citroen: Jumper(2001-2006), Relay(2001-2006)
Peugeot: Boxer(2001-2006)

Software module 9 – Fiat, Lancia IMM100.01 immobox Marelli Price:100 Euro
Memory device is Motorola MCU MC68HC908AZ32 QFP64 package.
Expected file size is 512 bytes.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Software shows 5-digit PIN code.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Lancia: Lybra
Fiat: Multipla

Next Fiat/Alfa Romeo/Lancia->

Software module 10 – Audi immobox Delphi Price:100 Euro
Memory device is serial memory 93c46 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Audi: A4(-1997), A6(-1997)

Software module 11 – Peugeot, Fiat, Citroen immobox Siemens Price:100 Euro
Memory device is Motorola MCU MC68HC05E6 SO28 package.
Expected file size is 160 bytes.
Use TMPro chip or T5 transponder.
Software shows PIN code.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Peugeot: 306, Expert, Ranch
Citroen: Jumpy, Evasion
Fiat: Scudo, Ulysse

Software module 12 – Peugeot, Citroen immobox Valeo Price:100 Euro
Memory device is serial memory 93c46 SMD8 package.
Expected file size is 128 bytes.
Software shows PIN code.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Citroen: Saxo, Berlingo(-2000)
Peugeot: 106, 406(-1999), Partner(-2000)
Dongfeng: H30

Software module 13 – Peugeot, Fiat, Lancia, Citroen CPH Texton Price:100 Euro
Memory device is serial eeprom, which can be either 93c66 or 95040, both SMD8 package.
Expected file size is 512 bytes.
Use TMPro chip or T5 transponder.
Software shows PIN code.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Peugeot: 306, 806, Expert, Ranch
Citroen: Jumpy, Evasion, Xantia(-1999), Xsara(-1999), Synergie (1997-2002)
Fiat: Scudo, Ulysse
Lancia: Phedra

Software module 14 – Peugeot 206 BSI Siemens Price:100 Euro
Memory device is Motorola MCU MC68HC05B16 PLCC52 package.
Expected file size is 256 bytes.
Software shows PIN code.
Use PCF7935 or Silca T15 – JMA TP14 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Peugeot: 206(1998-2001)

Software module 15 – Peugeot 406 BSI Siemens Price:100 Euro
Memory device is serial eeprom 93c66 SMD8 package.
Expected file size is 512 bytes.
Use PCF7935 or Silca T15 – JMA TP14 transponder.
Software shows PIN code.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Peugeot: 406(1999-2002)

Software module 16 – Daewoo immobox Price:100 Euro
Memory device is Motorola MCU MC68HC05B16 PLCC52 package.
Expected file size is 256 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Daewoo: Espero, Lanos(-2002), Leganza(-2000), Matiz(-2001), Nexia, Nubira(-2000)

Software module 17 – Honda, Rover immobox Valeo Price:100 Euro
Memory device is Motorola MCU MC68HC05B16 PLCC52 package.
Expected file size is 256 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Honda: Accord(-1999), Civic(-2001)
Rover: 600, 618, 620, 800

Software module 18 – Honda, Acura immobox Megamos Price:100 Euro
Memory device is serial memory 93c46 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Honda: Accord(-1999), Civic(-2001), CR-V(-2000), Integra, Legend, Passport, Prelude, Shuttle(-2000)

Software module 19 – Opel IMMO1 immobox Siemens Price:100 Euro
Memory device is Motorola MCU MC68HC05B16 PLCC52 package.
Expected file size is 256 bytes.
Software shows PIN code.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Opel: Astra F, Calibra, Combo B, Corsa B, Omega(1996-1999), Sintra(-1999), Tigra, Vectra B
Cadillac: Catera

Software module 20 – Opel IMMO2 immobox Siemens Price:100 Euro
Memory device is Texas Instrument MCU TMS370C702 PLCC28 package or Motorola MCU HC908AB16A QFP64 package.
Motorola is locked, password for reading eeprom area is F3-B1-F3-AB-F3-A5-F3-9F.
Expected file size is 256 bytes.
Software shows PIN code.
Use PCF7935 or Silca T15 – JMA TP14 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Opel: Agila, Astra G, Combo C, Corsa C, Meriva, Omega(1999-), Sintra(1999-), Tigra, Vectra B(1999-), Zafira
Fiat: Sedici
Suzuki: SX4

Software module 21 – Mitsubishi immobox Bosch Price:100 Euro
Memory device is serial eeprom 93c56 SMD8 package.
Expected file size is 256 bytes.
Software shows PIN code.
Use PCF7935 or Silca T15 – JMA TP14 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Mitsubishi: Carisma(1998-), Space Star(1998-)

Software module 22 – Volkswagen, Skoda, Seat IMMO1 immobox Siemens Price:100 Euro
Memory device is Motorola MCU MC68HC05B16 PLCC52 package.
Expected file size is 256 bytes.
Software shows PIN code.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Volkswagen: Caddy(-1998), Golf 3, Passat 3, Polo 3(-1998), Sharan(-1998), Transporter(-1998), Vento
Seat: Arosa(-1998), Alhambra(-1998), Cordoba(-1998), Ibiza(-1998), Inca(-1998), Toledo
Skoda: Felicia, Pick-up
Ford: Galaxy

Software module 23 – Volkswagen, Seat IMMO2 immobox Siemens Price:100 Euro
Memory device is Texas Instrument MCU TMS370C702 PLCC28 package.
Expected file size is 256 bytes.
Software shows PIN code.
Use PCF7935 or Silca T15 – JMA TP14 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Volkswagen: Caddy(1998-2000), Golf cabrio, Lupo(-2000). Polo 3(1998-2000), Sharan(1998-2000), Transporter(1998-2000)
Seat: Arosa(-2000), Cordoba Vario(-2000), Ibiza(1998-2000), Inca(1998-2000)
Ford: Galaxy

Software module 24 – Volkswagen, Seat, Ford IMMO3 immobox Valeo Price:100 Euro
Memory device is serial eeprom 24c04 or 24c16 both SMD8 package.
Software shows PIN code.
Expected file size for 24c04 is 512 bytes, for 24c16 is 2048 bytes.
Use PCF7935 or Silca T15 – JMA TP14 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Volkswagen: Lupo(2000-2002), Polo(2000-2002), Transporter(2000-2002)
Seat: Arosa(2000-2002), Alhambra(2000-2002), Inca(2000-2002)
Ford: Galaxy(2000-2002)

Software module 25 – Seat, Peugeot, Piaggio bikes immobox Marelli Price:100 Euro
Memory device is Motorola MCU MC68HC05E6 SO28 package.
Expected file size is 160 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Click here to see opened Piaggio/Peugeot bikes immobox.
Vehicles equipped with this unit:
Seat: Marbella
Fiat: Fiorino
Peugeot: Alise, Eliseo, Speedfight
Piaggio: Beverly, Liberty, Vespa, X8
Gilera: GP800

Next bike->

Software module 26 – Renault immobox Siemens Price:100 Euro
Memory device is Motorola MCU MC68HC05B16 PLCC52 package.
Expected file size is 256 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Renault: Megane(-1999), Twingo(-2000)

Software module 27 – Renault immobox Valeo Price:100 Euro
Memory device is serial memory 93c46 SMD8 package.
Expected file size is 128 bytes.
Software shows PIN code.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Renault: Laguna(-2001), Safrane, Espace(-1998)

Software module 28 – Renault, Dacia immobox Sagem Price:100 Euro
Memory device is serial memory 93c46 or 93c56 both SMD8 package.
Expected file size for 93c46 is 128 bytes, for 93c56 is 256 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Software shows 4-digit PIN code.
Vehicles equipped with this unit:
Renault: Kangoo(-2001), Clio(-2001), Trafic(-2001), Master(-2001)
Opel: Movano(-2001)
Dacia: Supernova

Software module 29 – Renault BSI Valeo Price:100 Euro
Memory device is Motorola MCU MC68HC908AZ32 QFP64 package.
Expected file size is 512 bytes.
Software shows 4-digit PIN code.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Renault: Espace(1998-2002)

Software module 30 – Renault UCH Sagem Price:250 Euro
This software can be used in 2 ways:
1.If you don`t know 12-digit PIN code:Memory device is serial eeprom 93c66 SMD8 package.
Expected file size is 512 bytes.Module shows PIN code.
Use TMPro chip or PCF7936 transponder.
if you use PCF7936 written transponder have to be matched with car using diagnostic device,if you use TMPro chip no need.
2.If you know 12-digit PIN code:Start software and manually select module. Insert PCF7936 or Silca T14 – JMA TP12 transponder.Press PROG button. Software opens box, where you must enter 12-digit PIN code.Verify it and press OK. Match prepared transponder with car using diagnostic device and PIN code.
Vehicles equipped with this unit:
Renault: Clio(2001-2006)

Software module 31 – Renault UCH Siemens Price:250 Euro
This software can be used in 2 ways:
1.If you don`t know 12-digit PIN code:Memory device is serial eeprom 93c66 or 95c040 both SMD8 package. Expected file size is 512 bytes.
Module calculates PIN code.
Use TMPro chip or PCF7936 or Silca T14 – JMA TP12 transponder.
Written transponder have to be matched with car using diagnostic device.
2.If you know 12-digit PIN code:Start software and select module.
Insert PCF7936 or Silca T14 – JMA TP12 transponder.Press PROG button.
Software prepares transponder.
Match prepared transponder with car using diagnostic device and PIN code.
Vehicles equipped with this unit:
Renault: Clio Symbol(2001-2006)
Dacia: Logan, Logan MPV

Software module 32 – Mercedes Sprinter, Vito immobox Temic Price:100 Euro
Memory device is Motorola MCU, which can be either MC68HC05X16 or MC68HC908AZ32, both QFP64 package.
Important note: if Motorola MCU is MC68HC05X16 – eeprom area is locked, you have to use proper programmer to read it.
For MC68HC05X16 expected file size is 256 bytes, for MC68HC908AZ32 expected file size is 512 or 1024 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Note: if immobox contain RF receiver in metal box, this means that original key had remote function.In this case you have also to perform START ERROR repair.

Vehicles equipped with this unit:
Mercedes: Sprinter(1998-2006), Vito(1998-2006)
Volkswagen: LT28(2000-), LT35(2000-)

Software module 33 – Peugeot bike engine ECU Marelli Price:100 Euro
Memory device is Motorola MCU MC68HC05B16 QFP64 package.
Expected file size is 256 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start bike.
Click here to see opened Peugeot bike engine ECU Marelli.
Vehicles equipped with this unit:
Peugeot: Alise, Eliseo, Speedfight
Piaggio: Beverly, Liberty, Vespa, X8

<-Previous bike | Next bike->

Software module 34 – Volvo IMMO3 immobox Bosch Price:100 Euro
Memory device is serial eeprom 93c56 or 93c66, both SMD8 package.
For 93c56 expected file size is 256 bytes, for 93c66 is 512 bytes.
Use PCF7935 or Silca T15 – JMA TP14 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Volvo: C70(1998-), S40(1998-), S70(1998-), S80(1998-1999), V40(1998-), V70(1998-2000)
Volvo trucks: FH12, FM12

Next truck->

Software module 35 – Volvo, Mitsubishi CARTRONIC immobox Bosch Price:100 Euro
Memory device is serial memory 93c46 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Mitsubishi: Carisma, Magna
Volvo: 850, 940, 960, C70(-1998), Polar, S40(-1998), S70(-1998), V40(-1998), V70(-1998)

Software module 36 – Iveco Daily/Iveco Truck immobox Bosch Price:100 Euro
This module can be used in 2 ways:
1.If you don`t know 5-digit PIN code:Memory device is serial eeprom 93s56 SMD8 package.
Expected file size is 256 bytes.
Module shows 5-digit PIN code.
Use TMPro chip or PCF7936 or Silca T14 – JMA TP12 transponder.
If you use PCF7936 written transponder have to be matched with car using diagnostic device,if you use TMPro chip – no  need.
2.If you know 5-digit PIN code:Start software and select manually module.
Insert PCF7936 or Silca T14 – JMA TP12 transponder.
Press PROG button. Software prepares transponder. Match prepared transponder with car using diagnostic device and PIN code.
Vehicles equipped with this unit:
Iveco: Daily(2001-2007)
Iveco trucks: Eurocargo(2001-2007), Stralis(2001-2007)

Software module 37 – Mercedes Actros, Atego engine ECU Temic Price:100 Euro
Memory device is serial eeprom, which can be 93c56, 93c66, 93c86,25c640 or 95c128, all SMD8 package.
For 93c56 expected file size is 256 bytes, for 93c66 expected file size is 512 bytes, for 93c86 is 2048 bytes,for 25c640 is 8192 bytes and for 95c128 is 16384 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the truck.
Vehicles equipped with this unit:
Mercedes trucks: Actros(1998-), Atego(1998-), Axor(1998-), Econic(1998-)

<-Previous truck | Next truck->

Software module 38 – Opel, Isuzu immobox Megamos Price:100 Euro
Memory device is serial eeprom 93c46 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Software shows 4-digit PIN code.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Opel: Frontera(1998-)
Isuzu: KB300, Rodeo
Chevrolet:Colorado

Software module 39 – PSA Volkswagen Seat Opel Nissan Ford Mitsubishi new chip Price:100 Euro
This module can prepare PCF7935 or Silca T15 – JMA TP14 transponders, so they become ready to be matched with particular car using diagnostic device and PIN code.
Prepared ID40 chips are switable for absolutely all Opel Immo1/Immo2 cars.
Prepared ID41 chips are switable for Nissan NATS 2-4 and some NATS 5 cars.
Prepared ID42/ID44 chips are switable for Volkswagen and Seat Immo1/Immo2 cars with external immoboxes and also for Ford Galaxy.
Prepared ID45 chips are switable for all Peugeot 206/406 with BSI Siemens.

Next dealer key generation->

Software module 40 – BMW, Rover, Mini immobox EWS Price:100 Euro
Memory device is Motorola MCU MC68HC11EA9 PLCC52 or MC68HC9S12D64 QFP80 package.
IMPORTANT NOTE: Motorola MC68HC9S12D64 and MC68HC11EA9 are LOCKED.Use proper programmer to read them.
For Motorola MCU MC68HC11EA9 PLCC52 package expected file size is 512 bytes.
For MC68HC9S12D64 QFP80 package expected file size is 1024 bytes.
Use PCF7935 or Silca T15 – JMA TP14 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
BMW: series 3(-2002), series 5(-2002), series 7(-2002), series 8(-2002), X-3(-2002), X-5(-2002), M3(-2002), Z3(-2002)
Rover: 75
Mini: Cooper
Landrover:Freelander(2001-2003)

Next Range/Land Rover->

Software module 41 – Mazda immobox Temic Price:100 Euro
Memory device is Motorola MCU MC68HC705P3 SO28 package.
Expected file size is 128 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Mazda: 323(-1999), 626(-1999), MX-3, MX-5, MX-6, Xedox 6, Xedox 9
Ford: Probe

Software module 42 – Mazda immobox Lucas 19AS Price:100 Euro
Memory device is Motorola MCU MC68HC05B6 PLCC52 package.
Expected file size is 256 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Mazda: 323(-1999), 626(-1999), MX-5

Software module 43 – Nissan, Subaru immobox Siemens Price:100 Euro
Memory device is Motorola MCU MC68HC05B6 PLCC52 package.
Expected file size is 256 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Nissan: Almera(-1998), Primera(-1998), Pulsar(-1998), Serena(-1998), Sunny, Terrano 2(-1998), Vannete(-1998)
Subaru: Impreza(-2000), Legacy(-1998), Outback(-1998)

Software module 44 – Renault UCH Sagem type 2 Price:100 Euro
This module can be used in 2 ways:
1.If you don`t know 12-digit PIN code:Memory device is serial eeprom 93c66 SMD8 package.
Expected file size is 512 bytes.Module calculates PIN code.
Use TMPro chip or PCF7936 or Silca T14 – JMA TP12 transponder.
if you use PCF7936 written transponder have to be matched with car using diagnostic device, if you use TMPro chip – no need.
2.If you know 12-digit PIN code:Start software and select module.
Insert PCF7936 or Silca T14 – JMA TP12 transponder.Press PROG button. Software opens box, where you must enter 12-digit PIN code.Verify it and press OK.Match prepared transponder with car using diagnostic device and PIN code.
Vehicles equipped with this unit:
Renault: Kangoo(2002-2007), Twingo(2002-2007), Trafic(2002-2007), Master(2002-2007)
Opel: Vivaro(2002-2007), Movano(2002-2007)
Nissan: Interstar(2002-2007)

Software module 45 – Fiat, Lancia, Citroen, Peugeot vans, Iveco vans/trucks CODE2 with BSI Marelli type 2 Price:250 Euro
Memory device is serial eeprom 95c160 or 95c320, both SSOP8 package.
For 95c160 expected file size is 2048 bytes, for 95c320 is 4096 bytes.
Software shows 5-digit PIN code.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Fiat: Bravo(2007-), Ducato(2006-), Stilo(2007-), Punto(2007-)
Citroen: Jumper(2006-), Relay(2006-)
Peugeot: Boxer(2006-)
Lancia: Ypsilon(2007-)
Iveco: Daily(2007-), Eurocargo(2007-)

<-Previous Fiat/Alfa | Next Fiat/Alfa->

Software module 46 – Volvo IMMO1 immobox Bosch Price:100 Euro
Memory device is serial memory 93c46 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Volvo: 850, 940, 960, C70(-1998), Polar, S40(-1998), S70(-1998), V40(-1998), V70(-1998)

Software module 47 – Saab body module TWICE Price:200 Euro
Memory device is Motorola MC68HC05X32 QFP64 package.
Expected file size is 256 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Important note: Motorola MCU is with locked eeprom area, you have to use proper programmer to read it.
Vehicles equipped with this unit:
Saab: 9-3(-2003), 9-5(-2003)

Software module 48 – Fiat New Panda BSI Siemens VDO Price:250 Euro
Memory device is Motorola MCU MC9S12DG128 QFP 112 package.
Expected file size is 2048 bytes.
You can read and write Motorola with TMPro, view connection diagram.
Use TMPro chip or PCF7936 transponder or remote key with PCF7941.
NOTE:If remote key is locked,you can unlock it view connection diagram.
Software shows PIN code.
Written transponder or remote key is ready programmed to start the vehicle.
Remote is also ready to operate,no need OBD2 programming.
In case it doesn`t start to operate immediately – program it by OBD2 and PIN code.
Vehicles equipped with this unit:
Fiat: Panda(2003-2012)

<-Prev.Fiat/Alfa | Next Fiat/Alfa->

Software module 49 – Opel immobox Megamos type 2 Price:100 Euro
Memory device is serial eeprom 93c46 SMD8 package.
Expected file size is 128 bytes.
Software shows PIN code.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Opel: Frontera(1996-1998)

Software module 50 – Jaguar immobox Price:100 Euro
Memory device is serial eeprom 93c46 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Jaguar: Sovereign, XJ, XJS, XK, XK8

Software module 51 – Renault Premium/Midlum immobox Texton Price:200 Euro
Memory device is serial eeprom 93c46 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the truck.
Vehicles equipped with this unit:
Renault trucks: Premium(-2007), Midlum(-2007)

<-Previous truck | Next truck->

Software module 52 – Toyota immobox with ID33 Price:100 Euro
Memory device is serial eeprom 24c04 DIL8 package.
Expected file size is 512 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Toyota: Carina, Celica(-1998), Estima(-1998), Paseo(-1998), Previa(-1998), Starlet(-1998)

Next Toyota->

Software module 53 – MAN TGA module FFR Price:200 Euro
Memory device is serial eeprom, which can be either 25c128 or 25c256, both SMD8 package.
Expected file size is 16384 or 32768 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the truck.
Vehicles equipped with this unit:
Man trucks: TGA, TGS

<-Previous truck | Next truck->

Software module 54 – Porsche body module with ID13 Price:150 Euro
Memory device is serial eeprom 93c56 SMD8 package.
Expected file size is 256 bytes.
Software shows PIN code.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Porsche: 911(-1999), Boxter(-1999)

Next Porsche->

Software module 55 – General Motors GM Passkey3 immobox Delphi Price:100 Euro
Memory device is Motorola MCU MC68HC908AS20 PLCC52 package.
Expected file size is 512 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Buick: Century, Le Sabre, Park Avenue, Regal, Rendevouz, Roadmaster
Cadillac: Deville STS, Dorado, S5S, Seville, STS
Chevrolet: Camaro, Cavalier, Corvett, Impala, Malibu, Montecarlo,
Venture
Oldsmobile: Aurora, Silhouette
Pontiac: Aztec, Bonneville, Grand Prix, Montana
SAAB: 9-7

Software module 56 – Acura immobox Price:100 Euro
Memory device is serial eeprom 93c46 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Acura: 3.5 RL, CL, Integra, MD-X, NSX, TL

Software module 57 – Renault UCH Johnson Controls type 1 Price:100 Euro
This module can be used in 2 ways:
1. If you don`t know 12-digit PIN code: Memory device is serial eeprom 95c080 SMD8 package.
Expected file size is 1024 bytes.Module calculates PIN code.
Use TMPro chip or PCF7936 or Silca T14 – JMA TP12 transponder.
If you use PCF7936 written transponder have to be matched with car using diagnostic device, if you use TMPro chip – no need.
2. If you know 12-digit PIN code:Start software and select module.
Insert PCF7936 or Silca T14 – JMA TP12 transponder. Press PROG button.
Software opens box, where you must enter 12-digit PIN code.Verify it and press OK.
Match prepared transponder with car using diagnostic device and PIN code.
Vehicles equipped with this unit:
Renault: Kangoo(2007-), Trafic(2007-), Master(2007-)
Opel: Vivaro(2007-), Movano(2007-)

Software module 58 – Ducati bikes dashboard Marelli Price:200 Euro
Memory device is serial eeprom 24c02 or 24c16 SMD8 package.
Expected file size is 256 or 2048 bytes.
Softwae shows 5-digit PIN code.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Software shows 5-digit PIN code.
Vehicles equipped with this unit:
Ducati: 600, 620, 749, 800, 900, 999, 1000

<-Previous bike | Next bike->

Software module 59 – Fiat Grande Punto BSI Delphi Price:250 Euro
Memory device is serial eeprom 93c86 SMD8 package or NEC MCU.
For serial eeprom 93c86 expected file size is 2048 bytes.
You can read Fiat BSI by OBD2 using Immo tool with Fiat software activation.
For files read by OBD2 expected size is 21 or 32768 or 65536 bytes.
Use TMPro chip or PCF7936 transponder or remote key with PCF7946.
Software shows 5-digit PIN code.
Written transponder is ready programmed to start the vehicle.
Note:for files read by OBD2 from NEC MCU software shows PIN code and prepares keys but does not create new file. You must program prepared keys by OBD2 and PIN code.
IMPORTANT when you want to program remote key :open key and look on PCB.
You will find 2 SMD chips – PCF7946 (SMD 14 pins) and smaller SMD chip, which can be with 8, 10, or 16 pins.
If smaller SMD chip is with 10 or 16 pins, PROGRAM KEY AS TYPE 1.
If smaller SMD chip is with 8 pins, PROGRAM KEY AS TYPE 2.
IMPORTANT:if buttons of remote operate, but not work properly, for ex. button for locking opens trunk, this is NOT A TMPro SOFTWARE PROBLEM. Use other type remote.
Vehicles equipped with this unit:
Fiat: Grande Punto, 500, Fiorino, Qubo, Doblo
Alfa Romeo: Mito
Ford: KA
Citroen: Nemo
Peugeot: Bipper
Opel: Combo D

<-Previous Fiat/Alfa | Next Fiat/Alfa->

Software module 60 – Polonez immobox Megamos Price:100 Euro
Memory device is serial eeprom 93c46 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Polonez: Pick-up
Jinbei: Brilliance

Software module 61 – Tata Safari immobox Alltech Price:100 Euro
Memory device is serial eeprom 24c01 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Tata: Safari

Software module 62 – Key copier for ID11, ID12, ID13, SAAB and ID33 fixed keys Price:100 Euro
Module helps you to copy Philips, Temic and Megamos fixed keys onto TMPro chip or T5 transponder.
For Renault ID33 key you can see 4-digit PIN code.

Software module 63 – Key copier for ID33, ID41, ID42, ID44 and ID45 keys Price:100 Euro
Software helps you to copy crypto keys onto PCF7935 transponder.
You can clone Nissan ID41, VAG ID42, VAG ID44 ,Ford Galaxy ID42, Ford Galaxy ID44 and Peugeot ID45 keys.
For ID45 Peugeot 206/406 keys you can see vehicle PIN code.
NOTE for VAG/Ford Galaxy ID44 keys: Around 50% of VAG/Ford Galaxy ID44 keys can be cloned. To see if particular key can be cloned – read it and check information in STATUS bar. If you get “No data for copying” – key cannot be cloned.

Software module 64 – Key copier for 4C Texas fixed keys Price:100 Euro
Software helps you to copy Texas fixed keys onto TMPro chip or K-JMD transponder.

Software module 65 – Key copier for Texas Crypto keys. Price:150 Euro
Software helps you to copy Texas Crypto keys onto TMPro chip or K-JMD transponder.
For Renault ID4D keys software shows 8-digit PIN code.
IMPORTANT NOTE: you need TPX CLONER or 4D decoder for to copy ALL Texas Crypto keys or read Renault 8-digit PIN code from key. See exceptions note below.
Cloner must to be connected to COM port of your computer thru simple convertor cable. Converter cable is MANDATORY. Cloner also needs 12 v supply for to work.
If your computer does not have pure COM port, you can use good USB-RS232 converter or PCMCIA-RS232 card.
Exceptions note: For copying of Toyota, Lexus, Yamaha, Suzuki bikes, Suzuki Liana, Kawasaki, MV Agusta, Daihatsu, Perodua and Mitsubishi Canter Fuso TPX cloner IS NOT NEEDED.

Next key copying->

Software module 66 – Yamaha bikes immobox Moric Price:250 Euro
Memory device is serial eeprom Seiko S29190 SMD8 package.
Eeprom can be located in 2 different position. Click here and here to see where to dig for to reach eeprom.
Expected file size is 128 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start bike.
Note: latest Yamaha immobox Moric DO NOT HAVE serial eeprom, so please check your immobox before purchasing this software. If there is no serial eeprom, but 16 pin chip TMS3705 you need software module 108.
Vehicles equipped with this unit:
Yamaha: BT1100, FJR, FZR, FZ1, FZ6, FZS, XT, XTR, XTX, XVX, YZF
MBK: Skycruiser 125

<-Previous bike

Software module 67 – Suzuki bikes engine ECU Denso, Mitsubishi Price:250 Euro
Memory device is serial eeprom 93c66 or 93c86 or 24c02 or 24c16 or 24c64 – all SMD8 package.
Expected file size is 256 or 512 or 2048 or 8192 bytes.
For engine ECU 32910-10L00 memory device is data flash and file size is 65536 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Suzuki: Absolutely ALL models with normal metal key – Bandit, Hayabusa, GSX-650F, GSX-R600, GSX-R750, GSX-R1000, Burgman(2012-), DL650 and other not listed here.

Software module 68 – Kawasaki bikes engine ECU Denso, Mitsubishi Price:250 Euro
Memory device is serial eeprom 93c66 or 93c86 or 24c02 or 24c04 or 24c64 or 95c640 – all 8 pin SMD package.
Expected file size is 256/512/2048/8192 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Kawasaki: Absolutely ALL models with normal metal key – ZX-6R, ZX-10R, ZX-11R, ZX-12R, ZX-14, ZX-1000, Z-750S, Ninja, Z1000, Z800, Z900 and other not listed here.

Next bike->

Software module 69 – Mazda 3 dashboard YNS Price:100 Euro
Memory device is serial eeprom 93c56 or 93c66 8 pin SMD package.
Expected file size for 93c56 is 256 bytes and for 93c66 is 512 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Mazda: 3, 5, 6(2009-), CX-7, CX-9

Software module 70 – Ford dashboard Visteon type 1 Price:100 Euro
Memory device is Motorola MC9S12H256 or MC9S12H512, both 112 pin QFP package.
You can read and write Motorola with TMPro, view connection diagram.
Expected file size is 2048 or 4096 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Ford: Focus, C-Max, Transit Connect, Fiesta(2009-)

Software module 71 – Jaguar dashboard Price:100 Euro
Memory device is HC912D60 or HC912DG128 both 112 pin QFP package.
Expected file size is 1024/2048 bytes.
You can read and write Motorola with TMPro, view connection diagram.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Jaguar: X-type

Software module 72 – Ford engine ECU Delphi Price:100 Euro
Memory device is serial eeprom 95c160 8 pin SMD package.
Expected file size is 2048 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Ford: Focus, Fusion, Mondeo, Transit

Software module 73 – Ford engine ECU Visteon Price:100 Euro
Memory device is serial eeprom 95c040 8 pin SMD package.
Expected file size is 512 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Ford: Focus, Fusion, Mondeo, Transit, F150

Software module 74 – Ford, Mazda engine ECU Siemens Price:100 Euro
Memory device is serial eeprom 93c56/93c86 8 pin SMD package.
Expected file size is 256/2048 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Ford: Fiesta
Mazda: Mazda 2

Software module 75 – Ford Galaxy immobox Price:100 Euro
Memory device is serial eeprom 24c02 8 pin SMD package.
Expected file size is 256 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Ford: Galaxy

Software module 76 – Chrysler immobox SKIM Price:100 Euro
Memory device is serial eeprom 24c02 8 pin SMD or Motorola HC908AB16 or Motorola HC908AZ32 64 pin QFP package.
Expected file size is 256 or 512 bytes.
Software shows PIN code.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Chrysler, Jeep, Dodge

Software module 77 – KIA immobox Shinchang Price:100 Euro
Memory device is serial eeprom 93c46 8 pin SMD package.
Expected file size is 128 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Kia: Carens, Clarence, Joice, Rio, Sportage

Software module 78 – Suzuki immobox Mitsubishi Price:100 Euro
Memory device is serial eeprom 24c01 8 pin SMD package.
Expected file size is 128 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Suzuki: Alto, Ignis, Jimny

Software module 79 – Renault Megane immobox Siemens Price:100 Euro
Memory device is Motorola MC68HC05B6 52 pin PLCC package.
Expected file size is 256 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Module also shows PIN code if you wish to program common Texas crypto chips with diagnostic device.
Vehicles equipped with this unit:
Renault: Megane(1998-2003), Scenic(1998-2003)

Software module 80 – Renault Megane UCH Siemens Price:100 Euro
Memory device is Motorola MC68HC705B32 52 pin PLCC package.
Expected file size is 256 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Module also shows PIN code if you wish to program common Texas crypto chips with diagnostic device.
Vehicles equipped with this unit:
Renault: Megane(1998-2003), Scenic(1998-2003)

Software module 81 – Mazda 6 engine ECU Denso Price:100 Euro
Memory device is serial eeprom 93c56 SMD 8 package.
Expected file size is 256 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Mazda: 6

Software module 82 – Mazda 6 engine ECU Mitsubishi Price:100 Euro
Memory device is serial eeprom 24c02 or 93c56 or 93c66 or 93c86 – all 8 pin SMD package.
Expected file size is 256 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Mazda: 6

Software module 83 – Toyota Avensis immobox Valeo with ID4D-60 Price:100 Euro
Memory device is Motorola MCU MC68HC05E6 SO28 package.
Expected file size is 160 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Toyota: Avensis, Corolla

<-Previous Toyota | Next Toyota->

Software module 84 – Ford Transit 2008 BCM Siemens VDO Price:100 Euro
Memory device is Motorola MCU MC9S12DT256 QFP 112 package.
IMPORTANT NOTE: Motorola MC68HC9S12DT256 is LOCKED.Use proper programmer to read it.
Expected file size is 4096 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Ford: Transit 2008

Software module 85 – SsangYong immobox VDO Price:200 Euro
Memory device is Motorola MCU MC68HC05B16 SDIP56 package.
Expected file size is 256 bytes.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
SsangYong: Musso, Korando, Rexton (2002 – 2006)

Software module 86 – Chery, Samand immobox Siemens VDO Price:200 Euro
Memory device is Motorola MCU MC68HC908AB16A QFP64 package.
Expected file size is 256 or 512 bytes.
Software shows PIN code.
Use PCF7935 or Silca T15 – JMA TP14 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Chery: Asprinza, Speranza, Shrman, DR5
Samand: Soren
Chang Cheng

Software module 87 – Toyota, Lexus ECU Bosch, Fujitsu, Denso Price:200 Euro
Memory device is serial eeprom, which can be 24c02 or 25c020 or 95c040 or 95c080 or 93c56 or 93c86 – all 8 pin SMD package.
Expected file size for 24c02 , 25c020 and 93c56 is 256 bytes, for 95c040 is 512 bytes, for 25080 is 1024 bytes and for 93c86 is 2048 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Toyota: RAV4, Corolla, Sienna, Yaris, MR2
Lexus: IS200, IS300, GS300

<-Previous Toyota | Next Toyota->

Software module 88 – Scania trucks BCM Coordinator type 1 Price:250 Euro
Memory device is serial eeprom Xicor X5328 or 25c256, both 8 pin SMD package.
For X5328 expected file size is 4096 bytes, for 25c256 expected file size is 32768 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start truck.
Vehicles equipped with this unit:
Scania trucks: P230, P270, P280, P310, P320, P340, P360, P380, P400, P420, R340, R360, R380, R400, R420, R440, R470, R480, R500, R560, R580, R620

<-Previous truck | Next truck->

Software module 89 – Mazda RX-8 immobox Visteon Price:100 Euro
Memory device is serial eeprom 24c02 SMD 8 package.
Expected file size is 256 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Mazda: RX-8

Software module 90 – Yamaha scooter ECU Mitsuba Price:100 Euro
Memory device is serial eeprom 24c04 SMD8 package.
Expected file size is 512 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Yamaha:X-MAX 125

<-Previous bike | Next bike->

Software module 91 – Opel, Isuzu immobox Tokai-Rika with ID 4D-64 Price:100 Euro
Memory device is serial eeprom 93c66 DIL8 package.
Expected file size is 512 bytes.
Software shows PIN code.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Opel: Monterey
Isuzu: Big Horn, Trooper

Software module 92 – Toyota, Suzuki, Daihatsu, Hyundai immobox with ID4C Price:100 Euro
Memory device is serial eeprom 93c56 or 93c66 or 24c04 DIL8 package or Motorola HC705E6 SSOP28 package.
Expected file size is 160 or 256 or 512 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Toyota: 4-Runner(1997-2003), Avalon(1997-2003), Camry, Celsior, Colorada, Corolla(1996-2002), Echo, Hiace, Highlander(2001-2003), Hilux(1999-2004), Duet, Sparky, BB
Suzuki: Alto(1996-2002), Baleno, Grand Vitara(1996-2002), Jimny(1999-2002), Swift(1996-2005), Vitara(1996-2002), WagonR(1998-2000)
Daihatsu: Charade, Copen, Cuore, Feroza, Move, Sirion(1998-2004), Terios(1997-2005), YRV
Isuzu: Trooper
Hyundai:Atos, S-coupe, Accent, Pony, H-1, Coupe, Excel, Galloper

<-Previous Toyota | Next Toyota->

Software module 93 – DAF trucks immobox VDO Price:200 Euro
Memory device is Motorola MCU MC68HC908AZ32 or MC68HC908AZ60 , both QFP64 package.
Expected file size is 512 bytes or 1024.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Written transponder is ready programmed to start the truck.
Vehicles equipped with this unit:
DAF trucks: CF, LF, XF series

<-Previous truck | Next truck->

Software module 94 – Renault, Nissan UCH Johnson Controls type 2 Price:200 Euro
Memory device is serial eeprom 95c080 or 95c160 SMD8 package.
Expected file size is 1024 or 2048 bytes.
Use TMPro chip or PCF7936 transponder or remote key.
IMPORTANT NOTE: Nissan cars accept ONLY REMOTE KEYS or TMPro chip.
They DO NOT accept PCF7936 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Renault: Clio3, Modus
Nissan: Micra K12, Livina, Note

Software module 95 – Chrysler, Jeep immobox DaimlerChrysler Price:200 Euro
Memory device is serial eeprom 95c040 or 95c080 or 24c16 SMD8 or 93c86 – all SSOP8 package or Motorola 9S12DG128 80 pins QFP.
Expected file size is 512 or 1024 or 2048 bytes.
You can read and write Motorola with TMPro, view connection diagram.
Use TMPro chip or PCF7936 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Jeep: Compass, Commander, Grand Cherokee(2005-), Liberty(2005-), Patriot, Wrangler(2007-)
Chrysler: 300C(2005-), Pacifica(2004-), Voyager(2005-), Aspen (2007-), PT Cruiser(2006-), Sebring(2007-)
Dodge: Caliber, Journey, Charger

Software module 96 – Honda bikes ECU Keihin, OKI Price:250 Euro
Memory device is serial eeprom 93c46,93c56,93c66,93c86 SMD8 package or Motorola MCU MPC5602.
For MPC5602 must read and write DATA FLASH area of MPC5602,you can use UPA-USB-S or XPROG-box, view connection diagram.
For serial eeproms expected file size is 128,256,512 or 2048 bytes.
For MPC5602 expected file size is 65536 bytes.
Use TMPro chip or PCF7936 transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Honda: All Honda with HISS system – CBR 600F, CBR 600RR, CBR 900, CBR 1000, CBR 1100F, Gold 2800, NT650V, SH150, SH300, Shadow 750, Silver Wind, Varadero, VT750, VTX1800, X11, Hornet, CB400, CB500X and more…

<-Previous bike

Software module 97 – Suzuki bikes ECU Denso, Keihin, Mitsubishi Price:100 Euro
Memory device is serial eeprom 24c02 or 93c66 SMD8 package.
Expected file size is 256 or 512 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Suzuki: Burgman, GSX-1400, Skywave

Software module 98 – Aprilia, Moto Guzzi bikes dashboard Digitek Price:100 Euro
Memory device is serial eeprom 24c01 or 24c02 or 24c16 – all SMD8 package.
Expected file size is 128 or 256 or 2048 bytes.
Software shows PIN code.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Aprilia: SR, RSV4, Scarabeo, Atlantic 500
Moto Guzzi:Bellagio, Griso, Norge, Stelvio

Next bike->

Software module 99 – Mitsubishi, Suzuki immobox ID4C type 2 Price:100 Euro
Memory device is serial eeprom XICOR X24c01 (not same as 24c01) SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Mitsubishi: 3000GT, Colt, Eclipse, Express, Galant, Lancer, Mirage, Montero, Nimbus, Pajero, Shogun, Space Gear, Space Runner, Space Wagon
Suzuki: Alto, Grand Vitara, Baleno, Jimny, Swift, Vitara

Software module 100 – Fiat dashboard Marelli, VDO Price:250 Euro
Memory device is serial eeprom 95c160 or 24c16 both SMD8 package.
Expected file size is 2048 bytes.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Software shows PIN code.
For Marelli dashboard written transponder is ready programmed to start the vehicle.
For VDO dashboard transponder has to be matched with car using diagnostic device.
VagTacho K+CAN supports key programming for Fiat dashboards, please visit VagTacho K+CAN
Vehicles equipped with this unit:
Fiat: Palio, Siena, Strada, Uno 2010

<-Previous Fiat/Alfa | Next Fiat/Alfa->

Software module 101 – Ducati bikes dashboard Digitek Price:150 Euro
Memory device is serial eeprom 24c16 SMD8 package.
Expected file size is 2048 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the bike.
Software shows PIN code.
Vehicles equipped with this unit:
Ducati: 848, 948, 1049, 1098, 1198

<-Previous bike | Next bike->

Software module 102 – Samand, Saipa, Chery, Hainan Mazda, Chang Cheng new chip Price:200 Euro
This module can prepare PCF7935 or Silca T15 – JMA TP14 transponders, so they become ready to be matched with particular car using diagnostic device and PIN code.
There are 5 types supported: Samand, Saipa, Chery, Hainan Mazda and Chang Cheng.
If you are not sure about key type of your car, read original key and look at last 3 bytes of data.
Then at selection menu of module choose same type.

<-Previous dealer key generation

Software module 103 – Texas Crypto new chip Price:200 Euro
This module can prepare TMPro chip or Texas Crypto or Silca 4D-60 – JMA TP06/TP19 transponders, so they become ready to be matched with particular car using diagnostic device and PIN code.
You can prepare chip to 27 different types:
Mitsubishi 4D-61, Subaru 4D-62 40-bits, Subaru 6D-62 80-bits, Ford/Mazda 4D-63, Suzuki 4D-65, Suzuki 4D-66, Suzuki bike, Yamaha bike, Kawasaki bike master key, Kawasaki bike slave key, Hyundai master key, Toyota 4D with password 32, 52, 92, B2, 33, 53, 93, B3, 34, 54, 94, B4, D4 and Lexus 4D with password 30, 50 and B0
IMPORTANT NOTE: Conversion from 4D-60 to Ford/Mazda 4D-63 is possible ONLY if last byte of serial number of transponder is 01.If you can`t find such transponders, you can use software 157.

Next dealer key generation->

Software module 104 – Honda, Acura immobox Valeo ID46 Price:200 Euro
Memory device is serial eeprom 24c04 or 93c66 both SMD8 package.
Expected file size is 512 bytes.
Use TMPro chip or PCF7936 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Honda: Accord, Civic, CR-V, Element, Pilot, Ridgeline
Acura: CSX, MDX, RDX, TL, TSX

Software module 105 – Honda immobox HIS-5 ID48 Price:200 Euro
Memory device is serial eeprom 93c46 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Honda: Accord, Civic, CR-V, FR-V, HR-V, Insight, Jazz, Logo, S 2000, Shuttle, Stream

Software module 106 – Mazda 6 diesel ECU Denso Price:100 Euro
Memory device is serial eeprom 93c86 SMD8 package.
Expected file size is 2048 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Mazda: 6

Software module 107 – Hyundai, Kia engine ECU Kefico, Bosch, Delphi Price:200 Euro
Memory device is serial eeprom 95c020 or 95c040 or 95c160 or 95c320 or 95p08, all SMD8 package.
For 95c020 expected file size is 256 bytes, for 95c040 expected file size is 512 bytes, for 95c160 expected file size is 2048 bytes, for 95c320 expected file size is 4096 bytes and for 95p08 expected file size is 1024 bytes.
Software shows PIN code.
Use TMPro chip or PCF7936 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Hyundai: Atos, Atos Prime, Getz, Accent, Coupe, Matrix, Carnival
Kia: Sorento, Carens, Picanto, Santa Fe, Ceed

Software module 108 – Yamaha bikes immobox Moric type 2 Price:500 Euro
This is new variant of Yamaha immobox, where there is no serial eeprom S29190.
On place, where you must find serial eeprom S29190, you find 16-pin chip TMS3705.
Keys ARE NOT in this chip TMS3705!
Memory device is MORIC MCU 30 pins SSOP package.
MORIC MCU in this immobox IS NOT POSSIBLE TO READ!
Programming of MORIC MCU is thru TMPro, view connection diagrams and instructions
Use TMPro chip or Yamaha key or Texas Crypto – Silca 4D-60 – JMA TP06/TP19 transponder.
Written transponder is ready programmed to start bike.
Also you can set immobox to virgin state.
IMPORTANT NOTE:You can program ONE MASTER key and ONE SLAVE key. If you want more slave keys, program a slave key and clone it with software 65.
IMPORTANT NOTE:If you want to program MASTER key, you also MUST RESET engine ECU (set engine ECU to VIRGIN state), because programming of MASTER key will DELETE synchronisation MORIC immobox – engine ECU. Procedure how to reset Yamaha engine ECU is described HERE
Vehicles equipped with this unit:
Yamaha: All models after year 2010,including but not limiting to R1, T-MAX, R6, BT1100, FJR, FZR, FZ1, FZ6, FZS, XT, XJR, XTR, XTX, XVX, MT etc…

<-Previous bike

Software module 109 – BMW bikes engine ECU Bosch Price:250 Euro
BMW bikes engine ECU are few types – BMSK , BMSX , BMS2K or BMSMP:
1 – For BMSK ECU – keys are stored in engine ECU.
Memory device is flash chip ST M58BW0160 – 80 pin PQFP package.
Expected file size is 2097152 bytes.
Reading is thru BDM100 interface or with flash programmer.
2 – For BMSX or BMS2K or BMSMP ECU – to find out where keys are stored you must check unit on ignition barrel.
– If there is IMMOBOX UNIT – keys are stored in this unit,not in engine ECU. To make key you need software 191.
– If there is KEY READER UNIT – keys are stored in engine ECU.
Memory device is TRICORE MCU eeprom area.
Expected file size is 65536 or 196608 or 262144 bytes.
Use TMPro chip or PCF7936 or Silca T14 – JMA TP12 transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
BMW: F800, R1200GS, K1600GT

Next bike->

Software module 110 – Smart ForFour ETACS Siemens-VDO Price:250 Euro
Memory device is Motorola MCU MC9S12B128 QFP112 package.
Expected file size is 2048 bytes.
Use TMPro chip or PCF7936 transponder or remote key.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Smart: ForFour
Mitsubishi: Colt IV

Software module 111 – Saab column module CIM Price:250 Euro
Memory device is serial eeprom 93c66 SMD8 package.
Expected file size is 512 bytes.
Use TMPro chip or PCF7936 transponder or remote key with PCF7946.
PCF7946 can be brand new blank – no need any preparation, software programs all parts.
Software shows PIN code.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Saab: 9-3(2003-), 9-5(2003-)
Cadillac: BLS

<-Previous Fiat/Alfa | Next Fiat/Alfa->

Software module 117 – Chevrolet, Opel immobox ID46 Price:200 Euro
Memory device is serial eeprom 95c040 SMD8 package or Motorola 9S08DZ60 QFP32 package.
Expected file size is 512 or 1024 bytes.
Use TMPro chip or PCF7936 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Chevrolet: Captiva, HHR, Cobalt
Daewoo: Windstorm, Nubira
Opel: Antara
GMC: Siera
Pontiac:Solstice

Software module 118 – Alfa Romeo, Fiat key reader TEG Price:250 Euro
Memory device is serial eeprom 24c04 SMD8 package.
Expected file size is 512 bytes.
Software shows 5-digit PIN code.
Use TMPro chip or PCF7936 transponder or remote key with PCF7941.
Written transponder or remote key is ready programmed to start car.
Remote is also ready to operate ,no need OBD2 programming.
In case it doesn`t start to operate immediately – program it by OBD2 and PIN code.
NOTE 1:Remote part will work 100% ONLY if key is unlocked with TMPro! If your key is unlocked, but you don`t know if it was unlocked using TMPro – unlock it with TMPro again, view connection diagram.
NOTE 2:Your key can be 2 different types – with PCF7341 and with PCF7941. At reading of key TMPro will show PCF7941 for both types. Click here to determine correct type of PCF in your key.
NOTE 3:Software supports also file read from Motorola in BSI, but in this case you must program key by OBD2 for to start car and activate remote. BSI can be read by OBD2 ONLY when there is valid key i.e. job is “Make Spare key”. If ALL KEYS ARE LOST you must remove BSI and read Motorola by testpoints, view connection diagram.
Vehicles equipped with this unit:
Alfa Romeo: 159, Brera, Spider
Fiat: Croma

<-Previous Fiat/Alfa | Next Fiat/Alfa->

Software module 128 – Gilera, Piaggio bikes engine ECU EFI Price:200 Euro
Memory device can be ST72c334 QFP64 package or serial eeprom 25c080 SMD8 package.

To see where keys are stored, check eeprom:
– If eeprom is 25c040, keys are in MCU ST72c334.
– If eeprom is 25c080, keys are in eeprom.
Reading of ST72c334 MCU is thru TMPro interface, view connection diagram.
Expected file size for ST72c334 is 256 bytes, for 95c080 is 1024 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Gilera: Nexus, Runner
Piaggio: Beverly, Vespa

<-Previous bike

Software module 129 – KTM bikes immobox ZADI Price:250 Euro
Memory device is serial eeprom 24c04 SSOP8 package.
Expected file size is 512 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
KTM: 690, 990, 1190

Next bike->

Software module 130 – BMW, Mini CAS SiemensVDO Price:400 Euro
Memory device is Motorola MCU 912DG256 or 9S12DG256 or 9S12XDP512
Expected file size is 2048 or 4096 bytes.
IMPORTANT NOTE: Motorola MCU is locked, not possible to read/write with TMPro.
If job is ALL KEYS LOST and you get message that file is CAS3+:
– if ISN is 16 bytes you need eeprom file read from engine ECU.
– if ISN is 2 bytes it is not possible to make key with TMPro.
If job is SPARE KEY – in all cases you need just CAS file.
For ECU with MPC556 MCU you must read external eeprom 95c640.
For ECU with TRICORE MCU you must read eeprom from TRICORE.
Use TMPro chip or PCF7936 transponder or remote key.
Written transponder or remote key is ready programmed to start car.
To activate remote: insert key to turn ignition ON. Remove key. Press any button few times. Repeat these steps till remote starts to work.
If you have got locked CHINESE BMW HITAG2 remote keys, you can UNLOCK them and set as BRAND NEW so you can use them again with any car.
Vehicles equipped with this unit:
BMW: series 1, series 3, series 5, series 6, X-3, X-5, X-6
Mini: Cooper

<-Previous bike | Next bike->

Software module 135 – Subaru immobox Mitsubishi Price:100 Euro
Memory device is serial eeprom 24c01 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Subaru: Tribeca(2005-), Forester(2005-), Outback(2005-), Legacy(2005-), Impreza(2005-)

Software module 136 – Ford BSI Delphi Price:100 Euro
Memory device is serial eeprom 95c320 8 pin SMD package.
Expected file size is 4096 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Ford: Mondeo, S-MAX

Software module 139 – SsangYong, Proton engine ECU VDO Price:200 Euro
Memory device is flash AMD AM29F200BB or AM29F400BB 44 pin SSOP package.
Expected file size is 262144 or 524288 bytes.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
SsangYong: Actyon
Proton: Wira
TagAZ:Road Partner

Software module 141 – Suzuki Liana immobox Price:200 Euro
Memory device is serial eeprom 93c66 SMD8 package.
Expected file size is 512 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Suzuki: Liana, Grand Vitara

Software module 142 – Ford engine ECU Siemens, EEC5 with ID4C Price:100 Euro
Memory device is serial eeprom 93c86, 95c040 or 24c02 all SMD8 packages.
For 93c86 expected file size is 2048 bytes, for 95c040 file size is 512 bytes and for 24c02 file size is 256 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Ford: KA, Fiesta, Mondeo, Bantam

Software module 143 – Mitsubishi, Subaru immobox Mitsubishi ID4D Price:250 Euro
Memory device is Motorola MCU MC68HC805P18 QFP44 package.
For reading of MCU you can use TMPro and MC68HC805P18 adapter.
Expected file size is 128 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Mitsubishi: Eclipse, Galant, Lancer, Pajero, Montero, Shogun, L200
Subaru: Tribeca, Forester, Impreza, Legacy

Software module 144 – Renault UCH Johnson Controls type 3 Price:200 Euro
Memory device is serial eeprom 95c160 SMD8 package.
Expected file size is 2048 bytes.
Use TMPro chip or PCF7936 transponder or remote key with PCF7946 – PCF7947.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Renault: Kangoo (2009-), Twingo(2009-)

Software module 145 – Key copier for Philips Crypto 2 (HITAG2, ID46, TP12) keys onto JMA TPX3/4 transponders Price:200 Euro
Module helps you to copy Philips Crypto 2 (HITAG2, ID46, TP12) keys onto JMA TPX3/4 – Errebi TX4/TX4SA transponders.
For performing cloning procedure YOU NEED VEHICLE TO BE WITH YOU, not only key.
IMPORTANT NOTE:you need JMA TPH cloner or 46 decoder for to work with this software.
TPH cloner needs to be connected to PC COM port (or thru USB-COM converter, if your PC doesn`t have pure COM port) thru simple convertor cable.Convertor cable is MANDATORY!Cable, that comes with TMPro box IS NOT for connecting JMA TPH cloner to PC.If cloner has 2 COM ports, connect cloner to PC use LEFT port of TPH cloner.You CAN`T USE USB port of cloner to connect it to PC, USB port is for software upgrade of TPH cloner.Cloner also needs 12v supply for to work, “plus” is in the center of connector.If you want to connect in one chain both TPH and TPX cloners, using convertor cable connect TPH cloner to PC and connect TPX cloner to right port of TPH cloner.Cable between TPH and TPX cloner no need converter.

<-Prev.key copying | Next key copying->

Software module 146 – Volkswagen Audi Seat Skoda ID48 dealer key CAN Price:200 Euro
This software offers to you 2 option of using:
1 – Use any OBD2 tool, that can extract 7 bytes of component security from car unit or extract them from ECU eeprom file.Run software, press PROG and select car manifacturer.Enter component security bytes.Module will prerare dealer key ready for programming with diagnostic device and PIN code.
2 – If you have working key, and you can extract at least 6 bytes component security from engine ECU, you can search for 7-th byte using working key and to prepare new dealer key.Go to TOOLS and select this option.Enter car manifacturer and 6 bytes of CS.Software will search for 7-th byte.When searching completed, remove original key, insert key with blank ID48 or Silca T6 – JMA TP08, press OK and dealer key will be prepared.
You can select between standard ID48 and TS48 copy transponder.If you select ID48, you will get dealer key ready for programming with diagnostic device and PIN code.If you select TS48, you will get full copy of original key ready to start car.

<-Prev.dealer key | Next dealer key->

Software module 147 – Kia immobox Texton ID48 Price:100 Euro
Memory device is serial eeprom 93c46 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Kia:Clarus, Shuma, Pride, Carnival, Sportage

Software module 148 – Mercedes C, E, G class masterchip ID44 Price:200 Euro
Module prepares PCF7935 chip and you can start with it Mercedes C and E class years 1995-1997 and G-class years 1995-1999.
Written transponder is ready programmed to start the vehicle.

Software module 149 – Volkswagen Passat 3C comfort with ID48 Price:400 Euro
Memory device is serial eeprom 95c320.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Written transponder is ready programmed to start the vehicle.
Software shows PIN code.
Vehicles equipped with this unit:
Volkswagen:Passat B6,B7

<-Previous truck | Next truck->

Software module 152 – Volkswagen Seat Skoda Audi new CAN transponder Price:200 Euro
Module precodes common ID48 transponder into JMA TP22 for Seat, JMA TP23 for Volkswagen, JMA TP24 for Skoda and JMA TP25 for Audi.
After precoding you have to match precoded transponder to car with diagnostic tool and PIN code.

<-Prev.dealer key | Next dealer key->

<-Previous Toyota | Next Toyota->

Software module 154 – Hana Benni immobox and ECU with ID4D Price:100 Euro
Module require two files – from immobox and from engine ECU.
For immobox memory device is serial eeprom 95040 file size 512 bytes, for ECU memory device is Motorola MCU 9S12KG256 file size 4096 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Hana Benni

Software module 155 – Volkswagen, Audi, Porsche, Bentley KESSY Siemens-VDO Price:250 Euro
Memory device is serial eeprom 93c86 SMD 8 package.
Expected file size is 2048 bytes.
Use TMPro chip or PCF7936 transponder or remote key with PCF7946.
Module also shows PIN code.
If you use PCF7936 or remote key with PCF7946 you must match programmed key to car with diagnostic device, if you use TMPro chip – no need.
Vehicles equipped with this unit:
Audi:A8
Volkswagen:Touareg, Phaeton
Porsche:Cayenne
Bentley:Continental

<-Previous Porsche | Next Porsche->

Software module 156 – Volvo CEM module ID48 with flash memory Price:250 Euro
Memory device is flash chip Intel TB28F400 S044 package.
Expected file size is 524288 bytes.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Volvo:S80(-2003), S60(-2003), XC70(-2003), XC90(-2003), V70(-2003)

Software module 157 – Texas Crypto 4D-63, 4D-64, 6D-72 new chip Price:100 Euro
This software can prepare TMPro chip or K-JMD transponder to following 4 types:
– Texas Crypto 4D-63 Ford/ Mazda/ Lincoln
– Texas Crypto 4D-64 Chrysler/ Subaru/ Jeep/ Renault/ Isuzu
– Texas Crypto for Triumph Tiger Explorer motorbikes
– Texas Crypto 6D-72 Toyota G with password 36, 56, 96, 37, 57 and 97. For Toyota G preparation only CN2/CN5 or K-JMD is possible to be used.
Prepared transponder you can program to car using diagnostic OBD2 device.

<-Previous dealer key generation

Software module 158 – Mitsubishi Grandis immobox Price:200 Euro
Memory device is serial eeprom 24c02 SMD8 package.
Expected file size is 256 bytes.
Use TMPro chip or PCF7936 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Mitsubishi:Grandis, L200, Nativa

Software module 159 – Honda engine ECU with ID48 Price:250 Euro
Memory device is Motorola MC68HC805P18.
For reading and writing of MCU you can use TMPro and MC68HC805P18 adapter.
Expected file size is 128 bytes.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Honda:HR-V(1999-2002), CR-V(1999-2002), Odyssey(1999-2002)

Software module 160 – Mitsubishi Outlander immobox with ID46 Price:200 Euro
Memory device is serial eeprom 24c16 SMD8 package.
Expected file size is 2048 bytes.
Use TMPro chip or PCF7936 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Mitsubishi:Outlander(2006-), Lancer(2006-)
Peugeot:4007(2008-), 5008(2009-)
Citroen:C4 Aircross(2012-)

Software module 161 – Proton Savvy immobox with ID4C Price:100 Euro
Memory device is serial eeprom 93c46 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Proton:Savvy

Software module 162 – Kawasaki JetSki Ultra engine ECU with ID4D Price:250 Euro
Memory device is serial eeprom 24c04 SMD8 package.
Expected file size is 512 bytes.
Use TMPro chip or K-JMD transponder.
You can choose between MASTER key (full power of engine) and SLAVE key (limited power of engine).
Written transponder is ready programmed to start the vehicle.
IMPORTANT NOTE: You cannot use original transponder that comes with key. You must replace it with programmed by TMPro.
Vehicles equipped with this unit:
Kawasaki:JetSki Ultra

Software module 163 – Suzuki engine ECU with ID46 Price:200 Euro
Memory device is serial eeprom 93c56 or 93c66 both SMD8 package.
For 93c56 expected file size is 256 bytes, for 93c66 is 512 bytes.
Use TMPro chip or PCF7936 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Suzuki:Swift(2007-), Splash(2007-), Grand Vitara(2007-)
Fiat:Sedici

Software module 164 – Jaguar S-type dashboard with ID4D Price:100 Euro
Memory device is Motorola HC11KS8 mask 0H98X PLCC68 package.
In this dashboard there are 2 MCU HC11KS8.
Click here to see which is correct MCU to read.
Expected file size is 640 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Jaguar:S-type
Lincoln:Navigator

Software module 165 – Porsche body module PAS with ID48 in key Price:700 Euro
Memory device is serial eeprom 93c66 SMD8 package.
Expected file size is 512 bytes.
Software shows PIN code.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Porsche:Carrera GT, Carrera GT2(996), Carrera GT3(996), Boxster(986), Boxster S(986), 911 Turbo(996), 911 Carrera 4(996)

<-Previous Porsche | Next Porsche->

Software module 166 – Hyundai, Kia immobox Shin Chang with ID4D Price:100 Euro
Memory device is serial eeprom 93c56 or 93c66 both DIL8 package.
Expected file size is 256 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start the car.
Vehicles equipped with this unit:
Hyundai:Sonata(2000-2005), H1(2000-2005), SantaFe(2000-2005),
Elantra(2000-2005), Grandeur(2000-2005), Sonica(2000-2005), Trajet(2000-2005)
Kia:Sorento(2000-2005)

Software module 167 – Opel Astra J, Chevrolet Cruze BCM Price:400 Euro
Memory device is serial eeprom 24c16, 95c160, 24c32 or 95c320 all SMD8 package.
For 24c16 or 95c160 expected file size is 2048 bytes.
For 24c32 or 95c320 expected file size is 4096 bytes.
Use TMPro chip or PCF7936 transponder or original remote key.
Software shows PIN code.
Written transponder is ready programmed to start car and remote will operate central lock.
Vehicles equipped with this unit:
Opel:Astra J, Insignia, Mokka
Chevrolet:Cruze, Onyx, Colorado
Buick:Regal
GMC:Sierra(2015+), Yukon(2015+), Escalade(2015+)

Software module 168 – Peugeot JetForce bike dashboard Price:100 Euro
Memory device is serial eeprom 95c020 SMD8 package.
Expected file size is 256 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the bike.
Vehicles equipped with this unit:
Peugeot:JetForce

<-Previous bike | Next bike->

Software module 169 – Daihatsu, Perodua immobox Tokai-Rika with ID4D-67 Price:250 Euro
Memory device is serial eeprom 93c66 SMD8 package.
Expected file size is 512 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Daihatsu:Cuore (2004-), Materia(2004-), Sirion(2004-), Terios(2004-)
Perodua:Myvi, Viva, Alza

Software module 170 – Mitsubishi Canter Fuso immobox Tokai-Rika Price:400 Euro
Memory device is serial eeprom 93c66 SMD8 package.
Expected file size is 512 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Mitsubishi truck:Canter Fuso (2007-2012)

<-Previous truck

Software module 171 – MV Agusta bikes dashboard Price:250 Euro
Memory device is PIC16F690 SSOP20 package.
You can read PIC16F690 with TMPro, view connection diagram
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start the bike.
Vehicles equipped with this unit:
MV Agusta:Brutale, Stradale

<-Previous bike | Next bike->

Software module 172 – Chevrolet, LDV immobox ShingChang Price:200 Euro
Memory device is ST72c334 SSOP44 package.
You can read ST72c334 with TMPro, view connection diagram
Expected file size is 256 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start the vehicle.
IMPORTANT NOTE before to order this software: please check MCU in immobox. If MCU is not ST72c334 but is 72334/MBX or similar – it is LOCKED and cannot be read!
Vehicles equipped with this unit:
Chevrolet:Lacetti, Optra
Daewoo:Nubira
LDV:Maxus

Software module 173 – Honda, Acura engine ECU with ID13 Price:100 Euro
Memory device is Motorola MC68HC805P18 SO28 package.
For reading MCU you can use TMPro and MC68HC805P18 adapter.
Expected file size is 128 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Honda:HR-V(1999-2002), CR-V(1999-2002), Odyssey(1999-2002), Accord(1999-2002)
Acura:Integra(1999-2004), MDX(1999-2002), TL(1999-2004), RSX(1999-2002)

Software module 174 – Landrover Freelander immobox SAWDOC Price:400 Euro
Memory device is PIC18F252 28 pin SO package.
You can read and program PIC18F252 with TMPro, view connection diagram
IMPORTANT NOTE:when you try to read MCU and software 180 pops-up, this means that PIC18F252 is locked, you must at first unlock it using software 180.
You can check if PIC18F252 is locked or not before to order this software.
Use TMPro chip or PCF7936 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Landrover:Freelander (2003-2006)

<-Previous Rover | Next Rover->

Software module 175 – Fiat, Alfa Romeo, Iveco BSI Marelli type 5 with ID46 Price:250 Euro
Memory device is serial eeprom 95c160 or 95c320 or 95c640 SSOP8 package.
Expected file size is 2048 or 4096 or 8192 bytes.
Use TMPro chip or PCF7936 transponder or remote key with PCF7946.
IMPORTANT when you want to program remote key :open key and look on PCB.
You will find 2 SMD chips – PCF7946 (SMD 14 pins) and smaller SMD chip, which can be with 8, 10, or 16 pins.
If smaller SMD chip is with 10 or 16 pins, PROGRAM KEY AS TYPE 1.
If smaller SMD chip is with 8 pins, PROGRAM KEY AS TYPE 2.
IMPORTANT:if buttons of remote operate, but not work properly, for ex. button for locking opens trunk, this is NOT A TMPro SOFTWARE PROBLEM. Use other type remote.
Software shows 5-digit PIN code.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Fiat:Grand Siena(2011-), Palio(2011-), Ducato(2011-), 500L(2011-)
Citroen:Jumper(2011-), Relay(2011-)
Peugeot:Boxer(2011-)
Alfa Romeo:Giulietta(2011-)
Dodge:Promaster(2011-)
Iveco:Daily(2011-)

<-Previous Fiat/Alfa | Next Fiat/Alfa->

Software module 176 – Volvo CEM Delphi with ID46 Price:400 Euro
Memory device is serial eeprom 95c320 SMD package.
Expected file size is 4096 bytes.
Use TMPro chip or PCF7936 transponder or remote key with PCF7953.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Volvo:S80(2006-2009), V70(2006-2009)

Software module 177 – Ducati bikes with dashboard MAE Electronics Price:800 Euro
Memory device is PIC18F6585 QFP64 package.
You can read PIC18F6585 with TMPro, view connection diagram.
It is just necessary to cut a small hole for to access programming points, no need to open dash completely.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the bike.
Software shows 5-digit PIN code.
Please look here before to order this software because your dashboard can be also module 189.
Vehicles equipped with this unit:
Ducati:Hypermotard(-2013), Streetfighter(-2013)

<-Previous bike

Software module 178 – Ducati bikes handsfree ZADI Price:800 Euro
Memory device is serial eeprom 24c04, view connection diagram.
Expected file size is 512 bytes
Use TMPro chip or Texas Crypto transponder or original Ducati handsfree key.
If you program original handsfree key please remove battery during key programming.
If you program transponder, to start bike you must put it near antenna. Look here where is antenna located.
Written transponder or key is ready programmed to start bike.
Vehicles equipped with this unit:
Ducati:Diavel, Multistrada

Next bike->

Software module 179 – Jaguar immobox ID48 Price:250 Euro
Memory device is serial eeprom 93c46 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Jaguar:XJ8, XJR, XK8, XKR

Software module 180 – Unlocking of locked PIC18F252 in SAWDOC Price:500 Euro
In 50% of SAWDOC immobilisers MCU PIC18F252 is locked against reading.
Because of this TMPro cannot read data for to make key.
This software can unlock PIC18F252 , view connection diagram
To unlock PIC:Press Select and write memory device button.Unlocking procedure will begin. At end of procedure MCU is unlocked.

<-Previous Range/Land Rover

Software module 181 – Land Rover Discovery 3 (LR3), Range Rover Sport CEM Price:900 Euro
Memory device is PIC18F6620 64 pin QFP package.
You can read and program PIC18F6620 with TMPro, view connection diagram.
Use TMPro chip or PCF7936 transponder or remote key.
NOTE:If remote key is locked,you can unlock it view connection diagram.
Written transponder is ready programmed to start car.
Remote is ready programmed to operate.
Vehicles equipped with this unit:
Landrover:Discovery 3, LR3 (2004-2010)
Range Rover:Sport (2005-2010)

Next Range/Land Rover->

Software module 182 – Ducati Panigale bike immobox ZADI Price:500 Euro
Memory device is Motorola 9S12P128.
You can read Motorola 9S12P128 using TMPro, view connection diagram.
Expected file size is 4096 bytes.
Use TMPro chip or Texas Crypto 4D-60 or 6D-60 transponder or original Ducati key.
Written transponder is ready programmed to start bike.
Software shows 4-digit PIN code.
Vehicles equipped with this unit:
Ducati:Panigale 899,Panigale 1199

<-Previous bike

Software module 183 – KTM bikes immobox ZADI type 2 Price:500 Euro
Memory device is Motorola 9S12P128.
You can read Motorola 9S12P128 with TMPro, view connection diagram.
NOTE:Around 30% of Motorola 9S12P128 in this immobox is locked and is not possible to be read. Please try to read Motorola before to order software.
Expected file size is 4096 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
KTM:Duke, 660, 990, 1050, 1190
Ducati:Panigale V2, Streetfighter V2

Next bike->

Software module 184 – Mazda, Ford, Proton immobox Lucas, Mitsubishi with Temic Crypto transponder Price:300 Euro
Memory device is Motorola MC68HC805P18 QFP44 package or Motorola HC05B16 PLCC52 package.
For reading Motorola MC68HC805P18 you can use TMPro and MC68HC805P18 adapter.
Expected file size for Motorola HC805P18 is 128 bytes, for Motorola HC05B16 is 256 bytes.
Software writes on TMPro chip or NON-LOCKED TK5560 or TK5561 Temic Crypto transponders.
It is not possible to use dealer Ford or Mazda 8C keys,because they are factory locked!
You can check your TK5561 transponder simply by reading it – you will get information if it is locked or unlocked.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Mazda:121, 323, 626, Demio, Premacy, Miata, MPV, MX-5, B2500, BT50
Ford:Ranger, Explorer
Proton:415, 416

Software module 185 – Key copier for Temic Crypto 8C transponders Price:100 Euro
This software module helps you to copy Temic Crypto 8C keys from Mazda, Ford Ranger and Proton.
Software writes on TMPro chip or NON-LOCKED TK5560 or TK5561 Temic Crypto transponders.
You can check your TK5561 transponder simply by reading it – you will get information if it is locked or unlocked.

<-Prev.key copying | Next key copying->

Software module 186 – BMW bikes C600, C650 Husqvarna Nuda dashboard Price:1200 Euro
Memory device is serial eeprom 25c160 SMD8 package.
Exected file size is 2048 bytes.
Use TMPro chip or Texas Crypto 40/80 bit transponder, for example Ford 80-bit
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
BMW:C600, C650
Husqvarna:Nuda, Terra

<-Previous bike | Next bike->

Software module 187 – Key copier for some Megamos crypto transponders Price:100 Euro
This software module can copy:
– Daewoo and KIA ID48 keys.
– All TS48 / CN6 / KD48 keys.
Software writes on TMPro chip or TS48 glass transponder.
When original transponder is TS48 copying is 100% possible.
When original transponder is ID48 cars that are possible to be copied are:
Daewoo/Chevrolet:Aveo, Kalos, Lacetti, Spark, Tacuma, Lanos, Leganza, Nubira
KIA:Carnival, Clarus, Pride, Sedona, Shuma, Sportage
Pontiac:G3

<-Previous key copying

Software module 188 – Toyota, Lexus, Subaru SMART key unit Denso Price:900 Euro
Memory device is serial eeprom 93c66 or 93c86 SMD8 package.
Exected file size for 93c66 is 512 bytes, for 93c86 is 2048 bytes.
Use ONLY ORIGINAL Toyota, Lexus and Subaru keys – DST 40, DST 80 (G-keys) or DST 128 (H-keys).
Programmed key will start vehicle when you put it near START button.
HandsFree function WILL NOT WORK.
To activate it, you must program ANOTHER NEW key by OBD2.
You CANNOT reprogram SAME KEY, that you added to file.
Vehicles equipped with this unit:
Toyota: Land Cruiser 200, Land Cruiser Prado, RAV4, Venza, Corolla, Spade, Porte, Vios, Yaris
Lexus: LX 570, GX 460, RX, LS 460, GS, IS
Subaru: Outback, Legacy, Forester, XV Crosstrek

<-Previous Toyota

Software module 189 – Ducati 2013 Hypermotard bike dashboard MAE Price:700 Euro
Memory device is serial eeprom 24c02 SOT23-5 package.
Expected file size is 256 bytes.
Use TMPro chip or Texas Crypto 40/80 bit transponder, for example Ford 80-bit
Written transponder is ready programmed to start bike.
Software shows 4-digit PIN code.
Please look here before to order this software because your dashboard can be also module 177.
Vehicles equipped with this unit:
Ducati: Hypermotard (2013-), Hyperstrada (2013-)

<-Previous bike | Next bike->

Software module 190 – Subaru 2013 BCM Mitsubishi Price:1000 Euro
Memory device is serial eeprom 24c02 SMD8 package.
Expected file size is 256 bytes.
Use original Subaru key or Texas Crypto 40/80 bit transponder, for example Ford 80-bit .
Written transponder is ready programmed to start vehicle.
Vehicles equipped with this unit:
Subaru: Forester, XV, Legacy, Impreza, Outback, WRX

Software module 191 – BMW bikes 2012 immobox EWS Price:1200 Euro
Memory device is Motorola 9S12G128.
You can read Motorola 9S12G128 with TMPro, view connection diagram.
If Motorola is locked, TMPro will unlock it automatically before to read eeprom area.
Expected file size is 4096 bytes.
Also you can synchronise engine ECU and immobox if they are not matched pair.
Use TMPro chip or Texas Crypto 40/80 bit transponder, for example Ford 80-bit
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
BMW motorbike: R1200GS, K1300, F800

<-Previous bike

Software module 192 – Ducati Monster dashboard MTA Price:700 Euro
Memoy device is serial eeprom 24c16 SMD8 package.
Expected file size is 2048 bytes.
Use TMPro chip or K-JMD transponder.
Software shows 4-digit PIN code.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Ducati: Monster 821

Software module 193 – Ducati Monster dashboard COBO Price:700 Euro
Memoy device is serial eeprom 24c512 SMD8 package.
Expected file size is 65536 bytes.
Use TMPro chip or Texas Crypto 40/80 bit transponder, for example Ford 80-bit .
Software shows 4-digit PIN code.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Ducati: Monster 797, 821, 1200

Next bike->

Software module 194 – Fiat South America immobox Marelli IMM009.10 Price:250 Euro
Memory device is Motorola 9S08DZ32 32-pin SMD package.
You can read Motorola with TMPro, view connection diagram.
Software shows 5-digit PIN code.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Written transponder is ready programmed to start car.
You can watch video HERE and HERE.
Vehicles equipped with this unit:
Fiat: Fiorino Furgao, Palio 2012->, Siena 2012->, Ducato 2012->
Peugeot:Boxer 2012->
Citroen:Jumper 2012->

<-Previous Fiat/Alfa | Next Fiat/Alfa->

Software module 195 – Great Wall immobox Delphi Price:250 Euro
Memory device is serial eeprom 93c66 SOT23-6 package.
Expected file size is 512 bytes.
You can read eeprom with TMPro, view connection diagram.
Use TMPro chip or Megamos Crypto or TS48 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Great Wall: Hover, Wingle, Voolex C10, C20, C30, V200, V240, X240.

Software module 196 – Kawasaki GTR1400 bike ignition switch Asahi-Denso Price:500 Euro
Memory device is serial eeprom 93c56 SMD8 package.
Expected file size is 256 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start bike.
IMPORTANT:This software can programs ONLY SIMPLE TRANSPONDER. Transponder must be placed on ignition switch then bike can start. Original handsfree key can be programmed only by Kawasaki diagnostic tool.
Vehicles equipped with this unit:
Kawasaki: GTR 1400

<-Previous bike

Software module 197 – Ducati Scrambler bike dashboard Price:700 Euro
Memoy device is serial eeprom 24c16 SMD8 package.
Expected file size is 2048 bytes.
Use TMPro chip or Texas Crypto 40/80 bit transponder or original Ducati key.
Software shows 4-digit PIN code.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Ducati: Scrambler

Software module 198 – BMW bike handsfree key unit HUF Price:1200 Euro
Memory device is Motorola 9S12XS256.
You can read Motorola 9S12XS256 with TMPro, view connection diagram.
Expected file size is 8192 bytes.
If Motorola is LOCKED, software will unlock it automatically before to read eeprom area.
Also you can synchronise engine ECU and immobox if they are not matched pair.
Software can program:
– UNLOCKED BMW handsfree key.
– Texas Crypto 128-bit AES transponder.
Written handsfree key or transponder are ready programmed to start bike.
IMPORTANT NOTE 1: in case you use transponder you must place it close to antenna for to start bike. In case you use handsfree key you must place it close to antenna for EWS to adopt it. View different antenna locations.
IMPORTANT NOTE 2: if you use VVDI BMW motorcycle remote key you must prepare it to right frequency before to program it with software.If remote key is with fixed frequency,it must be 100% same as shown on TMPro screen.
Vehicles equipped with this unit:
BMW: R1200GS,R1250GS,C400,F900

Next bike->

Software module 199 – Range Rover Vogue immobox Price:100 Euro
Memory device is Motorola 9S12DG128.
You can read and write Motorola with TMPro, view connection diagram.
Expected file size is 2048 bytes.
Use TMPro chip or PCF7936 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Range Rover:Vogue (2005-2010)

<-Previous Range/Land Rover

Software module 200 – Volkswagen, Audi, Porsche KESSY Continental, Siemens-VDO Price:1000 Euro
Memory device is serial eeprom 93c86.
It is MANDATORY to read and write eeprom with TMPro. To read or write eeprom solder 7 wires and leave red wire free. Use option “93c86(200)”. Also it is necessary to connect 12v to KESSY from external power supply. view connection diagram
Expected file size is 2048 bytes.
Software shows PIN code.
Use TMPro chip or PCF7936 transponder or original remote key.
Written transponder is ready programmed to start car.
Remote part is also programmed and work.
Vehicles equipped with this unit:
Volkswagen:Touareg (2008-), Phaeton (2008-)
Audi:A8 (2008-)
Bentley:Continental (2008-)
Porsche:Cayenne (2008-)
KTM:X-BOW

Software module 201 – Fiat BSI Continental type 1 Price:600 Euro
Memory device is Motorola MPC5606B.
You can read and write Motorola MPC5606B with UPA-USB-S programmer. View connection diagram
Expected file size is 65536 bytes.
Software shows 5-digit PIN code.
Use TMPro chip or HITAG 128-bit AES remote key or PCF7939MA transponder.
Written remote key or transponder are ready programmed to start car.
REMOTE part of remote key is also programmed and work.
Vehicles equipped with this unit:
Fiat:Uno (chassis F),Mobi,Toro,Strada
Peugeot:Partner (Brazil 2021->)
Citroen:Berlingo (Brazil 2021->)

Software module 202 – Fiat BSI Continental type 2 Price:600 Euro
Memory device is Motorola 9S12XEG384.
Expected file size is 4096 bytes.
Software shows 5-digit PIN code.
Use TMPro chip or HITAG 128-bit AES remote key or PCF7939MA transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Fiat:500X,500L,Toro
Ferrari:488

Software module 203 – Aprilia Caponord dashboard Price:150 Euro
Memory device is serial eeprom 93c76 SMD8 package.
Expected file size is 1024 bytes.
Use TMPro chip or T5 transponder.
Software shows PIN code.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Aprilia:Caponord

Software module 204 – KTM bikes handsfree ZADI Price:800 Euro
Memory device is Motorola 9S12GA240 QFP64 package.
You can read and write Motorola 9S12GA240 with TMPro, view connection diagram.
Expected file size is 4096 bytes.
Use TMPro chip or Texas Crypto transponder or original KTM handsfree key.
If you program original handsfree key please remove battery during key programming.
If you program transponder, to start bike you must put it near antenna below driver seat.
Vehicles equipped with this unit:
KTM:1290 Super Adventure, 1290 Super Duke

Software module 205 – Ducati Multistrada dashboard MAE Price:700 Euro
Memory device is Motorola 9S12G192 QFP100 package.
You can read and write Motorola 9S12G192 with TMPro.
Expected file size is 4096 bytes.
Use TMPro chip or Texas Crypto 40/80 bit transponder, for example Ford 80-bit
Software shows 4-digit PIN code.
Written transponder is ready programmed to start bike.
IMPORTANT NOTE:This software is for Ducati Multistrada with IGNITION SWITCH, not keyless start with button. Please check with your bike before to order.
Vehicles equipped with this unit:
Ducati:Multistrada

Software module 206 – MV Agusta Veloce dashboard COBO Price:700 Euro
Memoy device is serial eeprom 24c512 SMD8 package.
Expected file size is 65536 bytes.
Use TMPro chip or Texas Crypto 40/80 bit transponder, for example Ford 80-bit
Software shows PIN code.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
MV Agusta:Turismo Veloce

Software module 207 – Aprilia, Moto Guzzi, Piaggio dashboard COBO Price:200 Euro
Memory device is serial eeprom 24c512 SMD8 package.
Expected file size is 65536 bytes.
Use TMPro chip or T5 transponder.
Software shows PIN code.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Aprilia:Tuono, Dorsoduro, Shiver, RSV4, RS660, Tuareg
Moto Guzzi: V85TT
Piaggio:Vespa electric

Software module 208 – Moto Guzzi dashboard Price:200 Euro
Memory device is serial eeprom 24c32 SMD8 package.
Expected file size is 2048 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Moto Guzzi:Audace, California, Eldorado, MGX-21

Software module 209 – Ducati Panigale V4 dashboard MAE Price:700 Euro
Memory device is serial eeprom 24c32 SOT23-5 package.
Expected file size is 4096 bytes.
Use TMPro chip or Texas Crypto 40/80 bit transponder, for example Ford 80-bit
Software shows 4-digit PIN code.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Ducati:Panigale V4, Streetfighter V4

Software module 210 – Ducati Scrambler 1100 dashboard Price:700 Euro
Memory device is serial eeprom 95c512 SMD8 package.
Expected file size is 65536 bytes.
Use TMPro chip or Texas Crypto 40/80 bit transponder, for example Ford 80-bit
Software shows 4-digit PIN code.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Ducati:Scrambler 1100

Software module 211 – Moto Guzzi dashboard type 2 Price:200 Euro
Memory device is serial eeprom 24c512 SMD8 package.
Expected file size is 65536 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Moto Guzzi:V9, V7 III

Software module 212 – Chevrolet BCM General Motors Price:500 Euro
Memory device is Motorola 9S12XEQ384 112-pin QFP package.
You can read Motorola with TMPro, view connection diagram.
Expected file size is 4096 bytes.
Use TMPro chip or K-JMD transponder.
Software shows PIN code.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Chevrolet:Sail (2016-), Aveo (2016-)

Software module 213 – Scania trucks BCM Coordinator type 2 Price:500 Euro
Memory device is serial eeprom 25c256 8-pin SMD package.
Expected file size is 32768 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Scania:G-series,P-series

Software module 214 – Suzuki Grand Vitara immobox Texton ID46 Price: 250 Euro
Memory device is serial eeprom 95c020 8-pin SMD package.
Expected file size is 256 bytes.
Use TMPro chip or PCF7936 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Suzuki:Grand Vitara(2000-)

Software module 215 – Suzuki immobox Mitsubishi ID46 Price:100 Euro
Memory device is serial eeprom 24c01 8-pin SMD package.
Expected file size is 128 bytes.
Use TMPro chip or PCF7936 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Suzuki:Grand Vitara(2000-),Jimny(2000-)

Software module 216 – Volkswagen Passat 3C ID46 Price:400 Euro
Memory device is serial eeprom 95c320 8-pin SMD package.
Expected file size is 4096 bytes.
Software shows PIN code.
Use TMPro chip or PCF7936 transponder.
Written transponder is ready programmed to start car.
Note:To activate HF function of key,you must program it by OBD2 and PIN code.
Vehicles equipped with this unit:
Volkswagen:Passat B6,B7

Software module 217 – LDV vans BCM UAES Price:250 Euro
Memory device is serial eeprom 95c160 8-pin SMD package.
Expected file size is 2048 bytes.
Use TMPro chip or PCF7936 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
LDV:Maxus V80,Maxus LD100,Fargo Fora, Weststar Maxus

Software module 218 – Ford Cargo trucks dashboard type 1 Price:250 Euro
Memory device is serial eeprom 24c64 8-pin SMD package.
Expected file size is 8192 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start truck.
Vehicles equipped with this unit:
Ford:Cargo

Software module 219 – Ford dashboard Visteon type 2 Price:100 Euro
Memory device is Motorola MC9S12XEQ384 112 pin QFP package.
You can read Motorola with TMPro, view connection diagram.
Expected file size is 4096 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Ford: C-Max, Transit Connect, Fiesta(2014-)

Software module 220 – Ford F-Series BCM FoMoCo Price:500 Euro
Memory device is Motorola MC9S12XEP768.
You can read Motorola with TMPro, view connection diagram.
Expected file size is 4096 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Ford: F-150

Software module 221 – Fiat 500X, Tipo, Egea BCM Delphi Price:500 Euro
Memory device is NEC uPD70F3556.
You can read NEC data flash and program key by OBD2 with VagTacho K+CAN with Fiat activation or with UPA-S, view connection diagram.
Expected file size is 32768 or 65536 bytes.
Software shows 5-digit PIN code.
Use original Fiat remote key with Megamos Crypto 128-bit AES ID88 transponder. Remote part is also programmed and is operating.
Programmed key must be matched with car using diagnostic device.
Vehicles equipped with this unit:
Fiat:500X, Tipo, Egea
Jeep:Renegade

Software module 222 – MAN trucks PTM Continental Price:200 Euro
Memory device is flash M29W160EB 48 pin SSOP package.
Expected file size is 2097152 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
MAN:TGX

Software module 223 – Honda bikes ECU Keihin type 2 Price:500 Euro
Memory device is serial eeprom 95c128 8 pin SMD package.
Expected file size is 16384 bytes.
Use TMPro chip.
Written transponder is ready programmed to start the bike.
Vehicles equipped with this unit:
Honda:CB500X (2018-) , Africa Twin (2019-)

Software module 224 – Toyota Yaris Smart key Valeo ID46 Price:250 Euro
Memory device is serial eeprom 95c160 8 pin SMD package.
Expected file size is 2048 bytes.
Use TMPro chip.
Written transponder is ready programmed to start the vehicle.
You can program new Smart key by OBD2.
Vehicles equipped with this unit:
Toyota:Yaris

Software module 225 – Ford Cargo trucks dashboard type 2 Price:250 Euro
Memory device is serial eeprom 93c86 8 pin SMD package.
Expected file size is 2048 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Ford:Cargo

Software module 226 – KTM bikes immobox SPARK Price:700 Euro
Memory device is Renesas R5F10BAGL 30 pin SMD package.
You can read and write Renesas with TMPro, view connection diagram.
Expected file size is 4096 bytes.
Use TMPro chip or PCF7938XA transponder, for example THIS .
Written transponder is ready programmed to start the bike.
Vehicles equipped with this unit:
KTM: 790, 890, 990, 1090, 1190, 1290

Software module 227 – Piaggio bikes handsfree SPARK Price:700 Euro
Memory device is Renesas R5F10BLGK 64 pin QFP package.
You can read and write Renesas with TMPro, view connection diagram.
Expected file size is 4096 bytes.
Use TMPro chip or original handsfree key with NCF29A1M transponder or PCF7939MA transponder.
Written key or transponder is ready programmed to start the bike.
Vehicles equipped with this unit:
Piaggio: Beverly

Software module 228 – Suzuki Liana immobox Delphi ID46 Price: 250 Euro
Memory device is serial eeprom 95c020 8-pin SMD package.
Expected file size is 256 bytes.
Use TMPro chip or PCF7936 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Suzuki:Liana,Aerio,Baleno

Software module 229 – Chevrolet dashboard ID46 Price: 250 Euro
Memory device is serial eeprom 160D0W (35160) 8-pin SMD package.
Expected file size is 2048 bytes.
Use TMPro chip or PCF7936 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Chevrolet:Agile,Montana,Tornado,Corsa Utility

Software module 230 – Yamaha Majesty 125 engine ECU Price: 100 Euro
Memory device is serial eeprom 93c56 8-pin SMD package.
Expected file size is 256 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start vehicle.
Vehicles equipped with this unit:
Yamaha:Majesty 125

Software module 231 – KUBOTA digger engine ECU Price: 250 Euro
Memory device is serial eeprom 93c86 or 24c16 – both are 8-pin SMD package.
Expected file size is 2048 bytes.
Use TMPro chip or Texas Crypto transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
KUBOTA:all models with engine immobiliser

Software module 232 – BMW bike handsfree key unit ZADI Price:1200 Euro
Memory device is INFINEON TRICORE TC233-32.
You can read INFINEON TRICORE TC233-32 with VVDIProg.
Expected file size is 131072 bytes.
Software can program:
– UNLOCKED BMW handsfree key.
– Texas Crypto 128-bit AES transponder.
Written handsfree key or transponder are ready programmed to start bike.
IMPORTANT NOTE: in case you use transponder you must place it close to antenna for to start bike. In case you use handsfree key you must place it close to antenna for to activate it. View different antenna locations.
Vehicles equipped with this unit:
BMW: R1300GS

Software module 233 – Ducati Scrambler 800 dashboard Price:700 Euro
Memory device is serial eeprom 95c512 SMD8 package.
Expected file size is 65536 bytes.
Use TMPro chip or Texas Crypto 40/80 bit transponder, for example Ford 80-bit
Software shows 4-digit PIN code.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Ducati:Scrambler 800