2009 Scania truck all lost keys

Posted In: Cars
  • Participant
    Participant
    on: 25/01/2019 at 9:53 pm #22402

    Hi guys am new in this forum..my name is patrick..
    I have a Scania truck 2009 coo all keys lost..tried to make key with avdi but failed..is there solution for this??

    Keymaster
    Keymaster
    on: 18/03/2019 at 2:45 pm #22658

    Hello,yes there are 2 softwares for Scania – Software 88 and Software 213

    Participant
    Participant
    on: 12/07/2019 at 4:11 pm #22985

    If you won’t know how to operate on these software then you can take help from both dealer and locksmith to get new keys.

    Participant
    Participant
    on: 07/02/2020 at 6:38 pm #23474

    Thank you so much for your replies, there’s a firm near to my office that offers 24 hour locksmith services. I will talk to them about the issue and get new keys at an affordable cost.

    Participant
    Participant
    on: 08/07/2020 at 4:04 pm #24005

    Car locksmith near me uses all types of software to program vehicle keys. Many times I went there for key programming and they had done it at an affordable cost.

    Participant
    Participant
    on: 08/10/2020 at 4:53 pm #24348

    Getting help from sandy locksmith has resolved the issue without spending bucks on the dealership.

    Participant
    Participant
    on: 28/11/2020 at 5:52 pm #24477

    Locksmith alexandria also uses special programming tools and equipment for programming a remote key. They will provide you twenty-four-hour services at an affordable price.

    Participant
    Participant
    on: 18/01/2021 at 5:20 pm #24608

    You can contact those locksmith experts who can provide 24 hour locksmith support, they know how to make new truck keys quickly.

    Participant
    Participant
    on: 15/04/2021 at 6:01 pm #24771

    Locksmith Reston Va experts have used software 213 for making a new car key.

    Participant
    Participant
    on: 30/07/2021 at 4:29 pm #24904

    I have used these software and it really worked for me. As a locksmith i learned many new things by working on this software.

    Participant
    Participant
    on: 11/05/2022 at 2:04 pm #25307

    Hello my name is Eric Jarvis I have recently purchased module 213 for Scania trucks I have successfully read the chip of a coo circuit board and
    made a working key to make sure I had carried out the process right. Do you know if the file I have read can be explored any way to find transponder codes

    Thanks

Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.